Screw Lock Detachable Rings

Designed to fit Talley Bases DOES NOT fit on a Picatinny Rail

Screw Lock Detachable Rings/Quick-Detachable Scope Rings are known for precise tolerances. CNC automated equipment and stringent quality control have vaulted Talley products to the top of the scope ring industry. Simply said, Talley scope rings are the best.

Our ring system provides repeatability, flexibility, strength, and durability for the most discriminating of sportsmen.

The CZ550 Screw Lock Detachable Rings for dovetail setup is also available. Also 2 Fronts for Heym for dovetail setup.

Height: Low: .300″ / Available In 7/8″, 1″, 26mm & 30mm

Med: .400″ / Available in 1″, 30mm, 34mm & 36mm

High: .500″ / Available in 1″, 30mm, 34mm, & 36mm

Ex-High: .600″ / Available in 1″, 30mm and 34mm, & 36mm

Assembly Instructions:

1. Disassemble all parts of scope ring. Take care to
   identify all included parts.
   2. Affix Base plate (#D) to rifle unless rifle is
   equipped with Dovetail Receiver.
   3. Place parts (#A) & (#B) around scope tube.
   4. Insert screws (#1) in bottom of rings and tighten
   to 25in/lbs.
   ATTENTION: THERE SHOULD BE NO GAP AT
   BOTTOM OF RING.
   5. Insert springs (#4) in screw holes as pictured in
   Diag. 1
   6. Place Locking Plate (#C) over springs and finger
   tighten with Screw (#3) or with (optional) Lever
   Assembly.
   7. Repeat with 2nd ring assembly.
   8. Place the scope rings on Bases (#D) or Dovetail
   Receiver. Tighten the Locking Plate to 30in/lbs.
   This will secure the rings. You can square up the
   scope reticle and adjust for proper eye relief.
   9. Insert top screws (#2) and tighten to 20in/lbs.

Parts List for Screw Lock Detachable Rings:
#A –Scope ring 1
#B –Scope Ring 2
#C –Locking Plate
#D –Base Plate
#1 –#6-48×3/8” Torx
#2 –#6-48×5/16” Torx
#3 –#10-32×3/4” Torx
#4 –Spring