Pre-Accutrigger Scope Mount – 1″ Savage Pre-Accutrigger w/ Flat Rear Receiver
Made in America, the Savage pre-Accutrigger Scope Mount made by Talley Manufacturing offer a unique and simplified one-piece scope ring and base solution for Savage pre-Accutrigger rifles with flat rear receivers. This simplified mounting system eliminates the possibility of an “out of alignment” interface or “loose connection” between the ring and base of traditional two-piece designs. Ultimately this provides more strength and durability than rival steel rings and bases, but with a lighter overall weight. Fully CNC machined from lightweight aircraft-grade aluminum to the industries tightest tolerances, this rigid scope mounting platform requires no lapping and is ready to go out of the box.
With over 40 years of setting the industry standard for superior quality, Talley Scope Mounts have become known for precise tolerances. American craftsmanship, state-of-the-art CNC automation and stringent quality controls have vaulted Talley products to the top of the scope ring industry. Talley Scope Mount systems provide repeatability, flexibility, strength, and durability for the most discriminating of sportsmen. Simply said, Talley Scope Mounts are the best.
- Fully CNC Machined
- High-Grade Lightweight Aircraft Aluminum
- Integrated Scope Ring and Base Design
- Lapping Not Required
- Designed to fit Savage round receiver rifles with the AccuTrigger system and 8-40 screws..
- Please verify screw size before ordering. Most Savage Ultra Lights and Timberlines are being produced with the 8-40 screws.
What is the proper mount and screws for my Savage Centerfire Rifle?
Not sure what Savage Rifle or screws size you have? Use the link below for guidance on determining what Savage centerfire rifle you may have and what screw size you have.
Savage Scope Mounts w/8-40 Screws- Product Dimensions and Weights
Ring Height | Rear Height | Front Height | Available for Main Tubes | Weight (per set) |
Extra-Low | .300″ | .300″ | 1″ / 30MM | 1.9oz / 2.2oz |
Extra-Low Extended | .300″ | .300″ | 1″ / 30MM | 2.0oz / 2.3oz |
Low | .400″ | .400″ | 1″ / 30MM | 2.0oz / 2.3oz |
Low Extended | .400″ | .400″ | 1″ / 30MM | 2.2oz / 2.4oz |
Medium | .500″ | .500″ | 1″ / 30MM / 34MM | 2.2oz / 2.4oz / 2.8oz |
Medium Extended | .500″ | .500″ | 1″ / 30MM | 2.3oz / 2.5oz |
High | .600″ | .600″ | 1″ / 30MM / 34MM | 2.3oz / 2.6oz / 2.9oz |
High Extended | .600″ | .600″ | 1″ / 30MM | 2.4oz / 2.7oz |
Extra-High | .700″ | .700″ | 1″ | 2.6oz |
Extra-High Extended | .700″ | .700″ | 1″ | 2.7oz |
1 The height is measured from the top of the action/ receiver to the bottom of the scope tube at the respective mounting location
2 Hole spacing measured center to center.
3 Extended rings are typically used with long or magnum length actions when mounting a scope with a shorter main tube length. Front mount is offset by approximately 3/8 of an inch. Double Extended add approximately 3/8of an inch to each ring.
- Front hole spacing: .862 inches (21.89mm)
- Rear hole spacing: .862 inches (21.89mm)
- Sold in pairs.
- Includes mounting screws and wrench. (8-40 Screws / T-15)
What height scope rings do I need for my Savage Scope Mounts w/8-40 Screws?
Simplified method of determining required scope ring height
- Using some sort of shim (i.e. coins, washers, magnets) stack up the required number of shims to achieve desired scope height.
- Verify final height does not interfere with operation of bolt handle.
- Measure the final stack of shims.
Not sure what height scope ring to get? Please feel free to contact our technical support team for guidance on your Savage Scope Mounts. 072 241 1439
Torque Recommendations?
- Cap Screws on Rings: 17-20 in/lb on ring cap screws. Do not exceed scope manufacturer’s allowable torque specs on main tube. Always recommended to verify with scope manufacturer allowable torques to prevent marking or damage to scope tube. Always verify with the scope manufacturer the maximum allowable torque on main tube.
- Savage Scope Mounts w/8-40 Screws to Action: Torque can depend on the receiver. Please check with the rifle manufacturer (Savage) to verify allowable torque into receiver. Always make sure your torque wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over torquing.
Reviews
There are no reviews yet.